AC/DC Link cable
5 out of 5
Our low voltage AC/DC link cables are made by us, using Kimber Kable for an effective connection between power supplies and equipment. Originally developed for the Musical Fidelity X series, our link cable has gained popularity amongst audiophiles looking for the ultimate power supply connection.
Polarity
If you are ordering this cable for use with DC powered equipment, please double check the polarity and order accordingly. If you are not sure then please contact us, make sure you have the make and model of your equipment to hand or can be close to the equipment as we'll need to ask you some questions.
Your chosen cable will be clearly marked with its polarity.
The table below shows the voltage and DC link cable requirements for equipment we have tested, but contact us if you have a component that isn’t listed. Don’t guess!
Compatibility
The table below shows the size and polarity of the power INPUT socket on the components we know of. If you're ordering the link cable to use with a third party power supply, then you will need to find out the size and polarity of the power OUTPUT socket. Don’t guess!
| Arcam irDAC | 2.5 mm DC plug, centre positive |
| Arcam rDock-uni | 2.1 mm DC plug, centre positive |
| Beresford TC-7510 / TC-7520 & Caiman DAC | 1.3mm DC plug, centre positive |
| Brennan JB7 | 2.1 mm DC plug, centre positive |
| Cambridge Audio Dac Magic 100 | 3.0mm DC plug, centre positive |
| Cambridge Audio Dac Magic Plus | 3.0 mm DC plug, centre positive |
| Chord Chordette GEM DAC | 2.1mm DC plug, centre positive |
| Clear Audio Concept Turntable | 2.1mm DC plug, centre positive |
| DynaPak P75 Mark 1 phono stage | 2.1 mm DC plug, centre negative |
| DynaPak P75 Mark 2 phono stage | 2.5 mm DC plug, centre negative |
| DynaPak P75 Mark 3 phono stage | 2.1 mm DC plug, centre positive |
| Logitech Squeezebox | 2.5 mm DC plug, centre positive |
| Logitech Squeezebox Touch | 2.5 mm DC plug, centre positive |
| Meridian MC200 | 2.5 mm DC plug, centre positive |
| Musical Fidelity V-DAC, Mark 1 & Mark 2 | 1.3 mm DC plug, centre positive |
| Musical Fidelity X series | 2.1 mm connector both ends (AC power) |
| Naim equipment | 5 pin 240° DIN |
| Onkyo NDS1 | 2.1 mm DC plug, centre positive |
| Tivoli Audio table radios | 2.1mm DC plug, centre positive |
| Wadia 170i / 171i | 3 pin Mini DIN |
Customer Reviews
Overall product rating
5 / 5
5 / 5
reviewed by John Waller
20 Oct 2022
Yes, I recommend this product.
"More Improved Sound"
Having spoken to John at RA, I had two leads of this spec especially made to connect my Pro-Ject DS2 analogue preamp and DAC to their respective external power supplies (in addition, I had a 1.3mm jacks for the transport to power supply).Firstly, the build quality is superior to the best Pro-Ject supplied.
Secondly, the improvement in the sound quality is impressive. It has taken nearly two weeks for them to initially burn in, but now there is no comparison. I can't describe it easily except to say my classical CDs are just more impressive than ever.
I'm now thinking of getting the links from my mono power amps to their supplies upgraded, something I'll be discussing with RA shortly.
Perhaps, these are not the first upgrades to consider, but thoroughly recommended when appropriate, particularly as the cost was extremely reasonable
