Heatshrinks kit of 4

Set of 4, non-branded heatshrinks suitable for the preparation of the following cables:
4PR
8PR
4VS
8VS
4TC
8TC
Each shrink has an arrow printed on it to help with cable directionality.
Un-shrunk measurement: 50mm long x 15mm wide. When suitable heat is applied, the shrink will reduce in size to 50mm long x 5mm.
Ideally a heat gun should be used to fit the shrink, however a hairdryer can also be used.

Each shrink has an arrow printed on it to help with cable directionality.
Un-shrunk measurement: 50mm long x 15mm wide. When suitable heat is applied, the shrink will reduce in size to 50mm long x 5mm.
Ideally a heat gun should be used to fit the shrink, however a hairdryer can also be used.